QP is pretty much a plug and play solution where traffic recording can begin immediately after installation
Network Capture / Analysis Proof of Concept Environment (Basic):TAP Network Interface Speed/Mode: 10G/100G - Enterprise use case
TAP Network Interface Speed/Mode: 25G (BiDi) - 5G Fronthaul/BackhaulTAP can monitor East/Westbound and North/Southbound traffic
NW/SB ----> TAP ------> QP500 Monitoring Port 0
EB/WB ----> TAP ------> QP500 Monitoring Port 1Installation procedures:
Turn on the QP, QP500 is a portable solution so it does not need to be mounted in a rack
Configure IP address and routing/gateway for remote access
Connect recording interfaces to TAP and check whether the link goes up
Use QManager and begin recording
QP500 will record 1 month or more data from the network
Run search engine using QManager and PureInsight shortly after recoding starts