...
QManager can be accessed using a known IP address, or it can be accessed via the browser and typing in ‘127.0.0.1’ in the browser window (in the QP500/600 models only).
Login to QManager using the default credentials
After logging into QManager, go to [Configuration] → [Network] → [Host and Network]
Choose an interface whether it is ‘eno1’, 'eno2’ or others by clicking on the [Enable] checkbox
Checking on the [Enable] checkbox will allow you to make changes to the network interface fields in the form
Fill the required fields
Field | Value | Example | |
|---|---|---|---|
Name | enoX (where X is the interface number) | eno1 | |
Host Name | string value | quantea_qp4000 | |
Aliases | (Optional) alternative host name alias | quantea_b | |
IP Address | IPv4 or IPv6 address | 192.168.1.20 | |
Netmask | Netmask for IPv4 in bits. 24 is equivalent to /24 | 24 | |
DNS | (Optional) IP address of the DNS serverSet as Static (Checkbox) | Checkbox button to enable static IP configuration | [Checked] |
Addresses | IP address (IPv4/6) with subnet in CIDR notation | 192.168.1.1/24 | |
Gateway | Routing default gateway IP address | 192.168.1.1254 | |
Broadcast Address | (Optional) Broadcast address based on DNS | DNS nameserver IP address | 1928.1688.18.255 |
Default Gateway | Default gateway IP address | 192.168.1.254 |
...
8 | ||
Submit (Button) | Click to save and apply settings |
...
On the very bottom of the page, click on the [EnableSubmit] button to submit your changes and to apply the new network configuration
...