...
Overview
This guide provides a streamlined approach to initiating and stopping the capture of network traffic using QManager. Follow these simple steps for a seamless experience.
Capture Setup Overview
| Page Tree | ||||
|---|---|---|---|---|
|
Initiating Capture
To begin/stop the capture of network traffic using QManager, follow these step-by-step instructions:
...
Log in QManager and go to Capture Setting page
...
To begin capturing network traffic using QManager:
Navigate to the Capture Setting Page:
Access the Capture Setting page within QManager to configure your network traffic capture preferences.
Enter File Name and Directory:
Specify the Input File Name and Directory where the captured data will be stored.
...
Choose Filters:
Select desired filters, including options like Increment File, Compression, Rotational, OoS Detect, File Size, and Packet Slicing
...
, to tailor the capture settings to your requirements.
Adjust Virtual Capture Settings
...
Save settings
...
Go to Capture Pannel
...
Click “Start Port Capture” button (Button turns red when capture is started)
...
:
If filtering is enabled, make necessary adjustments to the Virtual Capture Settings to refine the capture parameters.
Save Your Settings:
Ensure to save your configured settings to apply them for the network traffic capture.
Proceed to Capture Progress:
Click the “Go to Capture Panel” button to navigate to the Capture Progress page.
Start Capture:
Click the "Start Port# Capture" button. Note that the button turns red to indicate the initiation of the capture process.
To stop capturing network traffic using QManager:
Navigate to the Capture Progress Page:
Return to the Capture Progress page within QManager.
Stop Capture:
Click the "Stop Port# Capture" button.
Confirm Stop Action:
Confirm the action by clicking "OK" in the popup box. The button returns to green, indicating the successful cessation of the network traffic capture.