Page Comparison

Go to the Capture Setting and Capture Progress page to start/stop capturing.To begin/stop the capture of network traffic using QManager, follow these step-by-step instructions:

...

To begin capturing network traffic using QManager:

1. Navigate to the Capture Setting Page:

   • Access the Capture Setting page within QManager to configure your network traffic capture preferences.

2. Enter File Name and Directory:

   • Specify the Input File Name and Directory where the captured data will be stored.

3. Choose Filters (such as :

   • Select desired filters, including options like Increment File, Compression, Rotational, OoS Detect, File Size, and Packet Slicing

   )

   • , to tailor the capture settings to your requirements.

4. Adjust Virtual Capture Settings if :

   • If filtering is enabled, make necessary adjustments to the Virtual Capture Settings to refine the capture parameters.

5. Save Your Settings:

   • Ensure to save your configured settings to apply them for the network traffic capture.

6. Proceed to the Capture Progress page by clicking :

   • Click the “Go to Capture Panel” button to navigate to the Capture Progress page.

7. Start Capture:

   • Click the "Start Port# Capture" button

   (it

   • . Note that the button turns red

   when capture begins)

   • to indicate the initiation of the capture process.

To stop capturing network traffic using QManager:

1. Navigate to the Capture Progress Page:

   • Return to the Capture Progress page within QManager.

2. Stop Capture:

   • Click the "Stop Port# Capture" button.

3. Confirm Stop Action:

   • Confirm the action by clicking "OK" in the popup box

   (the

   • . The button returns to green

   when the capture stops)

   • , indicating the successful cessation of the network traffic capture.