...
Preview of what is being captured. Information like the protocol/port, IP
address, and other data are displayed. Shows a 10-packet preview of what is being captured in the
selected port.
...
Go Back to Capturing Setup: Goes back to the capture setup page.
Open in New Window: Opens in a pop-up window, where you can expand the view such as
Statistics and Filter Information.
...
Each cell represents a single port. It shows the capacity bar and percentage,
current capture file name, and start/stop status for each port.
...
Port # | Mbps: Clicking on this button will show the statics of the selected port in the Statis-
tics panel.Start Port # Capture: Start capturing on the specific numbered port. The button displayed as
green means that capturing is not in progress.Stop Port # Capture: Stop the current capture progress on the specific numbered port. The
button displayed as red means that capturing is in progress.
...
This shows the RMON1-based statistics per port. It also includes counters and
percentage bar graphs.
...
Reset Statistics: Resets the statistics of all ports back to zero. When switched back to zero, the
statistics display will be empty until one of the ports receives a single packet.RX PKTS: Packets received by the port
RX Bytes: Bytes received by the port.
Unfiltered PKTS: Packets not captured by the port, which are rejected by a packet.
Overflow PKTS: Packets that were rejected, where the packet is larger than the buffer that is left
over. Therefore, the packet is not captured and dropped.Packet Size Breakdown: Packet breakdown from less than 64 bytes to more than 9000 bytes.
This includes a bar graph reflecting the percentage. Values smaller than 1% will be rounded to
0%.
4. Filters
The current filter setup, regardless of whether it is activated or deactivated, is displayed in this section. Scroll up or down in the panel to view the rest of the filters.
...
First Column: Filter Name, Protocol Information, and Enabled Status
Second Column: Protocol and Port Information
Third Column: IP Address Information
Fourth Column: Application Layer Filtering Information